방열판이 성능 손실 없이 연중무휴 24시간 산업용 사용을 견딜 수 있을까요?

Industrial systems don’t take breaks. Their thermal components can’t either. Heat sinks running 24/7 must survive heat, vibration, and years of stress.

Yes — our heat sinks are engineered for continuous industrial operation with guaranteed thermal stability, verified through thermal cycling and long-term durability testing.

If a single heat sink fails, the whole system might shut down. That’s why we focus on consistency, material resilience, and validated performance. Here’s how.

Can your heat sinks support 24/7 industrial operation?

Running nonstop means constant thermal stress. Some materials expand, deform, or wear out under this load.

Yes — we offer aluminum heat sinks designed for continuous use, supported by robust materials, thermal margins, and real-world operational testing.

We design for:

• Steady-state thermal load: Even at peak power.
• Mechanical stability: No fatigue under repeated thermal cycles.
• Margin of safety: Our designs allow extra thermal headroom.
• Passive and forced-air options: To suit static or high-power systems.

In past industrial cases, including power inverters and telecom base stations, our heat sinks have run for 5+ years with no performance drift.

What tests ensure heat sink durability over time?

Longevity isn’t guesswork — it’s verified. Heat sinks must survive vibration, moisture, temperature swings, and time.

We use thermal cycling, salt spray, UV exposure, and operational burn-in tests to ensure long-term heat sink performance under real-world conditions.

Table: Key Heat Sink Durability Tests

테스트 유형	What It Verifies	참고
Thermal Cycling	Resists expansion/contraction fatigue	1,000+ cycles, e.g. −40°C to 100°C
소금 스프레이	Corrosion resistance in humid environments	ASTM B117 compliant
자외선 노출	Coating stability outdoors	Includes sunlight, ozone, and smog
Burn-in Operation	Long-term stability under load	500–1,000 hours under real thermal loads
열 충격	No cracking after rapid temperature change	Confirms material bonding strength
Interface Degradation	Stability of grease/pads	Measured TIM performance post-cycling
Vibration	Mechanical stability in active machines	Tested to IEC/ISO standards

We often combine these in sequence — for example, cycle heat and humidity, then test resistance.

We also test thermal resistance (Rθ) after each stress cycle to ensure that heat transfer is still effective.

Are materials suitable for long-term heat cycling?

Heat sinks expand and contract every time they heat up or cool down. Weak materials fail quickly.

Yes — we use high-grade aluminum alloys, tested coatings, and compatible thermal interfaces that remain stable across thousands of thermal cycles.

Materials We Use

• Aluminum 6063-T5: Great thermal performance and corrosion resistance.
• 알루미늄 6061-T6: Higher mechanical strength, good fatigue resistance.
• Anodized surface: For corrosion and UV protection.

What Makes Materials "Cycling-Proof"?

1. Low creep: Material won’t deform under long-term thermal load.
2. Good thermal conductivity: Maintains cooling rate.
3. CTE matching: Reduces cracking from expansion differences.
4. Stable coatings: No peeling, fading, or conductivity loss.
5. Interface retention: TIMs (greases, pads) stay intact through cycles.

We avoid materials prone to oxidation or fatigue. Alloys are chosen based on load, temperature range, and vibration levels.

Table: Heat Sink Material Features

속성	요구 사항	Our Solution
열 전도성	>150 W/m·K	6063/6061 aluminum
Expansion Compatibility	Minimal mismatch with base systems	CTE-matched design
내식성	5+ years outdoor protection	Hard anodized surfaces
Coating Durability	No UV or salt damage	Anodizing + optional powder coating
피로 저항	10,000+ cycles	Certified fatigue testing

Do you offer heat sinks for mission-critical systems?

For some applications — failure is not an option. Think aerospace, data centers, or medical devices.

Yes — we offer high-reliability heat sinks for mission-critical systems with validated thermal stability and strict quality control.

Here’s how we meet the standard:

• Tight QA: ISO-certified, batch-level traceability.
• Redundancy: Designed with thermal margins and safety factors.
• Thermal Validation: Lab-tested thermal resistance per part number.
• 환경 허용 오차: Salt, UV, shock, and pressure tested.
• 문서: Complete with material certs and thermal reports.

Applications We Serve

산업	사용 사례
항공우주	Avionics cooling, satellite boards
의료 기기	Imaging, diagnostics
텔레콤	5G base stations, servers
Power Systems	Inverter and UPS cooling
Defense	Radar and mission computers

For these, we also offer embedded sensor-ready designs, letting you monitor temperature in real-time to catch any drift or warning signs early.

How do you guarantee consistent thermal performance?

Even small performance drops can ruin uptime. We ensure each unit meets or exceeds specs, every time.

We guarantee consistent thermal performance through strict QA, calibrated testing, redundant safety margins, and optional sensor integration.

1. Quality Control

• Fin spacing, coating thickness, and alloy verified in each batch.
• Surface flatness for proper TIM contact.
• Reject parts outside thermal resistance tolerance.

2. Batch Testing

• We measure RθJA (junction-to-ambient resistance) across samples.
• Calibrate against reference “golden unit” heat sinks.
• Retest units from long storage to ensure no drift.

3. Performance Margins

• Rated for 10–20% above expected load.
• Maintains performance even if TIM degrades slightly.

4. Sensor Compatibility

• Some designs allow for thermal sensors.
• You can monitor performance in real time.

Table: Thermal Consistency Features

기능	목적
Calibrated Test Setup	Ensures each part matches thermal targets
Material Certification	Confirms alloy purity and conductivity
TIM Compatibility	Works with top greases/pads
Safety Margin	Operates 10–20% below max temp
Long-Term Drift Testing	Detects any performance decay

결론

Not all heat sinks are built for 24/7 use. Ours are. With strong materials, verified testing, and mission-grade quality control, we keep your systems cool — nonstop.