How much weight can 1 aluminum extrusion support?

I once faced a scenario where a long aluminum frame structure sagged under a heavy load and I wondered—how much weight can an aluminum extrusion truly support?

The load‑capacity of an aluminum extrusion depends on alloy grade, profile geometry, support conditions, and connection design—there’s no single “how much” number that applies universally.

Let’s walk through the key factors, the geometry side, calculation methods, and how reinforcements help.

---

What influences extrusion load strength?

When you pick a profile and hang a heavy item—if you didn’t account for everything, failure may happen.

Load capacity is influenced by the material alloy, the length and orientation of the span, how the profile is supported, and how it connects to other parts.

材料の合金と焼入れ状態

The alloy matters. For example, 6063‑T6 has a high yield strength, while softer alloys like 1100 series have much lower limits. A stronger alloy results in higher allowable load.

Length and support conditions

An extrusion that is 500 mm long and supported at both ends will carry more weight than a 2000 mm span with a cantilever setup. Shorter spans reduce bending and deflection significantly.

Cross-section and geometry

A larger moment of inertia means higher resistance to bending. A thick-walled, tall profile will hold more load than a thin, small one. The shape and wall layout affect strength directly.

Connections and fixing

Even the best extrusion fails if its connections are weak. Poorly fastened joints or brackets can become the failure point. Fixed supports always hold more than loosely fastened ones.

Environment and dynamic loads

Vibration, shocks, and cyclic forces lower the effective strength. Long-term or dynamic loads require safety margins much larger than static applications. Temperature and corrosion also play a role.

Summary of factors

ファクター	なぜそれが重要なのか
合金と焼入れ	Defines strength and stiffness
Length/span & support	Affects deflection and moment capacity
Cross-section geometry	Determines bending resistance and stability
Fixing/connection design	Influences how loads are transferred or lost
Loading type & environment	External conditions impact durability and safety factors

---

Why wall thickness affects capacity?

If you just pick a “20×20 aluminium profile” without checking its wall thickness, you might end up with a sagging beam.

A thicker wall gives better strength and less deflection. Hollow sections reduce weight but may reduce stiffness unless optimized.

What wall thickness changes

1. 曲げ抵抗 — Thicker walls increase moment of inertia. This directly reduces deflection under load.
2. 座屈抵抗 — Wall thickness affects how easily the extrusion deforms under compression or side force.
3. Local deformation — Thin walls dent more easily when loads are focused on small areas.
4. 接合強度 — Thicker sections can hold screws and fasteners more reliably, reducing risk at connection points.

比較例

Two extrusions of the same external size—say 40×80 mm—can have very different strengths if one has 2 mm walls and the other has 4 mm. The thicker one resists bending and twisting far better.

実用上の考慮事項

• Wall thickness affects both performance and weight.
• You should balance wall thickness with material cost and expected load.
• Uniform wall thickness ensures predictable behavior during extrusion and use.
• In high-load applications, thicker walls provide better durability and reliability.

壁厚	Bending Strength	Deflection	Fastener Strength
1.5 mm	低い	高い	弱い
2.5 mm	中程度	ミディアム	可
4 mm	高い	低い	強い

---

How to calculate safe load limits?

When a client asked me to specify allowable load for a custom aluminum frame, I used formulas rather than guessing.

Safe load limit calculation typically uses beam bending and deflection formulas—choosing allowable deflection, then solving for allowable load using section properties and support type.

Basic steps

1. Define the span (L), support type (simply supported, cantilevered, etc.)
2. Use the correct modulus of elasticity (E), usually around 70 GPa for aluminum
3. Find the moment of inertia (I) and section modulus (W) of the profile
4. Choose an acceptable deflection limit (often L/1000 or L/500)
5. Calculate load (P) using deflection formulas
6. Check bending stress and ensure it’s below the material’s yield strength
7. Apply safety factors, usually ×2 or ×3 for conservative design

Formula reference

• Deflection (central load):
  [
  \delta = \frac{P \cdot L^3}{48 \cdot E \cdot I}
  ]
• Solving for load:
  [
  P = \frac{48 \cdot E \cdot I \cdot \delta}{L^3}
  ]
• Bending stress:
  [
  \sigma = \frac{M}{W} = \frac{P \cdot L/4}{W}
  ]

例

If a 1000 mm span aluminum profile has I = 4000 mm⁴, and allowable deflection is 1 mm, you can compute P accordingly. Then check that bending stress is well below the yield limit (say, 200 MPa for 6063-T6) and adjust.

パラメータ	価値
Span (L)	1000 mm
E	70,000 MPa
I