アルミニウム押出成形品の再生材含有率オプション？
Many buyers want greener products. At the same time, they worry about strength, consistency, and compliance. Recycled content sounds good, but the risks feel unclear.
Aluminum extrusions can include different levels of recycled material, from low to very high content, while still meeting performance and quality needs when managed correctly.
This topic matters because recycled content is no longer optional for many projects. Regulations, customer demands, and brand goals all push buyers to ask deeper questions before placing orders.
What recycled content levels are common in extrusions?
Many buyers ask for recycled aluminum but do not know what level is realistic. Some expect 100 percent recycled material without tradeoffs. This creates confusion at the quoting stage.
Most aluminum extrusions use recycled content between 30 percent and 75 percent, depending on alloy type, application, and quality control level.
In daily production, recycled content is not a single fixed number. It is a range that depends on process control and end use needs.
Low recycled content range
Low recycled content usually means 10 to 30 percent. This level is common in high precision profiles. Aerospace related or very tight tolerance parts often stay in this range.
Primary aluminum dominates the mix. Recycled material is added mainly through clean internal scrap.
Medium recycled content range
The most common range is 30 to 60 percent. Many architectural and industrial profiles fall here. Window frames, curtain wall systems, and general industrial parts often use this level.
At this range, mechanical properties remain stable. Surface quality is predictable. Cost control improves.
High recycled content range
High recycled content usually means 60 to 85 percent. This is common in non visible or semi structural parts. Solar frames, support rails, and transport components often use this mix.
Going above 85 percent is possible but requires strict sorting and melt control.
Why 100 percent recycled is rare
Pure recycled aluminum is difficult to control. Impurities build up fast. Alloy chemistry becomes unstable. This increases risk of cracks, porosity, and surface defects.
Below is a simple overview.
| Recycled Content Level | 典型的な範囲 | 一般的なアプリケーション |
|---|---|---|
| 低い | 10-30% | Precision industrial profiles |
| ミディアム | 30-60% | Architectural and industrial |
| 高い | 60-85% | Solar and transport systems |
Most aluminum extrusions use a mix of primary and recycled aluminum.真
A mixed approach allows stable alloy control while reducing environmental impact.
All aluminum extrusions can easily use 100 percent recycled material.偽
Very high recycled content increases impurity and consistency risks.
How does recycled aluminum affect mechanical properties?
Some buyers fear recycled aluminum is weaker. Others assume it performs the same without limits. Both views are incomplete.
Recycled aluminum can meet standard mechanical properties when alloy chemistry and process control are tightly managed. Problems appear mainly when impurity control is weak.
Mechanical performance depends more on chemistry control than on recycled percentage alone.
Strength and hardness impact
In controlled systems, tensile strength and yield strength remain within standard limits. For 6063 and 6061 alloys, recycled content up to medium or high range does not automatically reduce strength.
Problems appear when elements like iron or copper drift too high. These change grain structure and reduce ductility.
Elongation and toughness
Elongation is more sensitive than strength. High recycled content may slightly reduce elongation. This matters in bending or forming after extrusion.
For straight cut profiles with no secondary forming, this impact is often acceptable.
Fatigue and long term behavior
Fatigue resistance depends on internal cleanliness. Oxides and inclusions increase with poor scrap control. Good melt filtration reduces this risk.
Long term performance remains stable when recycled input is clean and sorted.
Surface and internal defects
Recycled aluminum increases risk of surface lines, pinholes, and color variation. This affects anodizing quality. Careful billet casting and homogenization reduce these issues.
Recycled aluminum always reduces extrusion strength.偽
Strength depends on alloy control, not recycled content alone.
Impurity control is the key factor affecting mechanical properties.真
Poor impurity control causes more issues than recycled percentage itself.
Are there certifications for recycled content usage?
Many buyers ask for proof. Claims alone are not enough. Certification helps reduce risk and supports compliance.
Yes, several certification systems exist to verify recycled content and responsible aluminum sourcing.
These systems focus on traceability and process control rather than marketing claims.
Recycled content declarations
Manufacturers can issue recycled content declarations based on mass balance. This shows average recycled input over a defined period.
These declarations must match production records and melt logs.
Third party audit systems
Independent audits verify sourcing, scrap handling, and production flow. Auditors check input ratios and process separation.
This improves buyer confidence and supports ESG reporting.
Environmental product documentation
Some projects require environmental product declarations. These include recycled content data and carbon footprint information.
They are often used in green building projects.
Limits of certification
Certification does not guarantee product suitability. It confirms content and process, not performance. Mechanical testing is still required.
Certifications can verify recycled content usage through audits.真
Third party audits check material flow and sourcing records.
Certification replaces the need for mechanical testing.偽
Performance testing is still required for quality assurance.
Can high recycled content meet structural standards?
Structural use creates the highest concern. Safety margins are smaller. Failure risk matters more.
High recycled content aluminum extrusions can meet structural standards when alloy limits, testing, and process control are strictly followed.
Recycled content alone does not decide compliance. The system around it does.
Alloy selection matters
Not all alloys behave the same. Some tolerate impurities better. 6063 works well for architectural structures. 6061 suits higher load applications with tighter control.
Choosing the right alloy is the first step.
Testing and qualification process
Structural profiles require tensile testing, hardness testing, and sometimes fatigue testing. These tests confirm compliance regardless of recycled level.
Consistent batch testing is more important at high recycled ratios.
設計安全率
Design codes include safety factors. Slight variation in material behavior is already expected. This allows recycled material use within limits.
Designers often specify tighter controls rather than banning recycled content.
Real world application examples
Many solar mounting systems and building frameworks already use high recycled content aluminum. Performance records over years show stable behavior when produced correctly.
High recycled content aluminum can meet structural standards with proper control.真
Standards focus on performance results, not material origin.
Structural aluminum must always be made from primary aluminum only.偽
Recycled content is allowed when performance requirements are met.
結論
Recycled aluminum content in extrusions offers flexible options, not a single answer. With proper alloy control, testing, and certification, recycled material can support both sustainability goals and technical performance needs.
