Hvordan svejser man aluminium?

Aluminum is light, strong, and corrosion-resistant—but welding it can quickly go wrong. Why is it so much harder to weld than steel?

To weld aluminum, you need the right method (usually TIG or MIG), thorough surface preparation, and precise control of heat and technique. It’s doable—but much trickier than welding steel.

Understanding the tools, techniques, and science behind welding aluminum can help avoid frustration, defects, and wasted materials.

Which welding methods are best suited for aluminum?

Aluminum is different from steel and needs more care in welding. Not all welding processes work well for it.

The best welding methods for aluminum are TIG (Gas Tungsten Arc Welding) and MIG (Gas Metal Arc Welding). Each has strengths depending on the part size, thickness, and finish you need.

A comparison of common welding methods

When to use which method

• Use TIG when you need a precise, high-quality finish. Ideal for thinner parts and visible welds.
• Use MIG for speed and thicker materials. Better for beginners if set up properly.
• Avoid stick welding for aluminum unless you’re repairing something in the field and have no better options.
• Specialized methods like friction stir or laser welding are used in aerospace and automotive industries.

What preparation is needed before welding aluminum?

Welding aluminum is not just about technique—it’s about preparation. Even with the best welder, bad prep will ruin your results.

Aluminum must be thoroughly cleaned, oxide must be removed, and the right filler and shielding gas chosen. Proper prep prevents porosity, weak joints, and cracking.

Step-by-step preparation process

1. Clean the surface

• Remove oil, dirt, and grease using a solvent like acetone or alcohol.
• Use a clean, dedicated stainless steel wire brush—never one used on steel—to scrub the surface.

2. Remove oxide layer

• Aluminum oxidizes instantly when exposed to air. This oxide melts at a much higher temperature than the base metal.
• You can use:
  • A chemical etching agent (e.g., sodium hydroxide followed by a rinse)
  • A mechanical method like a rotary tool or abrasives

3. Preheat the material

• Thicker aluminum (above 1/4") should be preheated to 250–400°F (120–200°C) to reduce cracking and help with heat distribution.
• Use a temperature stick or infrared thermometer to avoid overheating.

4. Choose the right filler metal

• 4043: Easier to use, better flow, less chance of cracking
• 5356: Stronger, harder, more corrosion-resistant, but prone to cracking in certain alloys

5. Select appropriate shielding gas

• Pure Argon: Standard choice for most aluminum welding
• Argon-Helium Mix: Offers deeper penetration and better arc stability on thicker material

Why is aluminum welding more difficult than steel?

Welders who switch from steel to aluminum are often surprised. Even skilled welders struggle. What makes aluminum so tough?

Aluminum is more difficult to weld than steel due to its high thermal conductivity, low melting point, rapid oxidation, and susceptibility to cracking. It requires tighter control and cleaner conditions.

Key differences between aluminum and steel

What makes welding aluminum tricky?

• Kølelegemer: Aluminum spreads heat quickly, cooling the weld too fast or drawing heat away from the arc.
• Thin metal risk: It’s easy to burn through if you pause too long.
• Oxide problem: Its oxide layer melts at a much higher temperature than the metal underneath.
• Revner: High risk of hot cracking if the wrong filler or technique is used.
• Porøsitet: Aluminum absorbs hydrogen, leading to weak, bubbly welds.

Can beginners successfully weld aluminum at home?

Yes—but it’s not plug-and-play. Beginners can do it if they start small, prepare carefully, and pick the right equipment.

With the proper tools, preparation, and practice, beginners can weld aluminum at home using MIG (with a spool gun) or TIG machines. MIG is easier to start with, while TIG offers better control.

What do you need to start welding aluminum at home?

Equipment checklist

Tips for home welding success

1. Practice on scrap first—especially with TIG, where controlling the arc takes time.
2. Preheat thicker parts to reduce cracking.
3. Use short welds and allow cooling if the metal starts to warp.
4. Avoid windy environments—argon shielding can be blown away, ruining the weld.
5. Keep materials dry—moisture causes hydrogen porosity.

Konklusion

Welding aluminum is harder than steel, but not impossible. With the right method—TIG for clean, thin welds or MIG for speed and ease—plus proper surface prep and careful technique, you can master aluminum welding at home or in the shop. Cleanliness, consistency, and practice are the keys to success.